SIEMENS SIWAREX IS Ex
SIWAREX IS Ex barrier for intrinsically safe connection of load cells mounting on standard rail, standard version Certified according to ATEX: (EEX IB) II C as associated equipment metrological approval
under the orderSIEMENS EXTENSION BOX TO
EXTENSION BOX TO EXTEND A LOAD CELL CONNECTING CABLE. USABLE IN EXPLOSIVE ATMOSPHERES IN INTRINSICALLY SAFE ELECTRICAL CIRCUITS. IP66, DIMENSIONS 80 X75X57 MM. CAUTION: IF SEVERAL LOAD CELL CONNECTION CABLES ARE EXTENDED AND CONNECTED IN A JUNCTION BOX SIWAREX JB, THE CABLE GLANDS M16X1.5 MUST BE REPLACED. PER LOAD CELL YOU NEED: 1 X EMC CABLE GLAND M20X1.5, 1 X EMC EXPANSION PIECE M16X1.5 - M20X1.5. SUPPLIER SUGGESTED: WWW.RST-GRUPPE.DE
under the orderSIEMENS TERMINAL BOX SIWAREX
TERMINAL BOX SIWAREX JB ATEX Stainless steel enclosure FOR CONNECTION OF UP TO 4 LOAD CELLS IN 4 OR 6-CONDUCTOR TECHNOLOGY, DEGREE OF PROTECTION: IP66 for use in explosive atmospheres II 2 G Ex ia/ib IIC T6 Gb II 3 G Ex nA IIC T6 Gc II 1 D Ex ia IIIC T85 Cel Da II 1 D Ex tb + ib IIIC T85 Cel Da IP66 DIMENSIONS: 150 x 100 x 63 MM
under the orderSIEMENS LI2Y 2X0,75ST +
LI2Y 2X0,75ST + 2 (2X0,34ST) - CY, SHEATH ORANGE, SPECIAL CABLE FOR CONNECTION SIWAREX MODULE TO JB JUNCTION BOX AND DISTRIBUTION BOX OR IB INTER- MEDIATE BOX AS WELL AS BETWEEN TWO IB'S FOR PERMANENT ON-SITE INSTALLATION;OCCASIONAL BENDING POSSIBLE. 10.8 MM OUTER DIAMETER AMBIENT TEMPERATURE -40 TO +80 CEL.
under the orderSIEMENS LI2Y 2X0,75ST +
LI2Y 2X0,75ST + 2X (2X0,34ST) -CY SPECIAL CABLE, WITH BLUE SHEATH CONNECTION OF JB JUNCTION AND DISTRIBUTION BOX IN AN AREA SUBJECT TO EXPLOSION HAZARDS AND IB INTERMEDIATE BOX FOR PERMANENT ON-SITE INSTALLATION; OCCASIONAL BENDING POSSIBLE, APPROX. 10.8 MM OUTER DIAMETER, AMBIENT TEMPERATURE -40 TO +80 CEL. CABLE CUT TO LENGTH, WITHOUT CONNECTOR.
under the orderSIEMENS SIWAREX U CONNECTING
SIWAREX U CONNECTING CABLE 9-PIN -FOR SERIAL LINKING OF SIWAREX U W.9-PIN PC NTERFACE (RS232C) - CABLE LENGTH 3 M
under the orderSIEMENS SIWAREX WP321 WEIGHING
SIWAREX WP321 WEIGHING ELECTRONIC (1 CHANNEL) FOR STRAIN GAUGE LOAD CELLS / FULL BRIDGES (1-4 mV/V) FOR SIMATIC ET200SP, FITS to BU-TYPE A0, RS485- INTERFACE FOR CONNECTION OF SIWATOOL OR A REMOTE DISPLAY
under the orderSIEMENS SIMATIC ET 200SP,
SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 2 X SG 4-/6-WIRE HIGH SPEED, FITS TO BU-TYPE A0, COLOR CODE CC00, CHANNEL DIAGNOSIS, 28/16BIT, +/-0,05%, FOR STRAIN GAUGE FULL BRIDGES
under the orderSIEMENS E counter with
E counter with LC display, 3-phase, 80 A, 2xS0, 2 tariffs, Direct connection with meter zero setting data transmission function
under the orderSIEMENS SENTRON, measuring device,
SENTRON, measuring device, 7KM PAC3200, LCD, L-L: 690 V, L-N: 400 V, 5 A, 3-phase, Modbus TCP, optional Modbus RTU / PROFINET / PROFIBUS, apparent/ active/reactive energy, class 0.5 acc. to IEC61557-12 or class 0.5s acc. to IEC62053-22, wide-range pwr sup. unit AC/DC, ring cable lug connection
under the order